Powered by Blogger.
RSS

Error 61.05 on HP Designjet 500, 510, 800

7:56 AM |

ould appears on HP DesignJets 800 Series, DesignJet 500 and 510.

Printer show a System Error: 61:05

The problem:

That's an error Processing Job.
This Error Code appears in these HP DesignJets with an HPGL/ 2 card installed, when processing either a PostScript or HP-GL/2 file.

Solution 1:

  • Switch the Printer Off 
  • Wait a few minutes. 
  • Switch the Printer On 
  • Resend the file that you were trying to print. 

Solution 2:
  • If the Error Code reappears, try to generate the file again and try to print again. 
  • If the file that is causing this error is PostScript, check if it is Binary. If the file is Binary, use AppleTalk to send the file to the Printer. 
  • If AppleTalk is not being used to send the Binary file to the Printer, you have to change the PostScript settings to Binary through the Front Panel (Set-up menu / PS settings / Encoding / Binary). 

  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • RSS
Read User's Comments1
Posted by efixsolution

How to fix error 0xc18a0401, oxc18a0401 on HP printers

8:24 AM | Labels: , ,

Solution 1:

  • Press and hold the "*" key. Press the "#" key and release both keys. Display should say "Enter Special Key Combo"
  • Press and release in sequence the "1", "2" and "3" buttons. Display should say "Support" and display the FW rev (something like R0631R).
  • Press and release the right arrow button until the display says "System Configuration Menu".
  • Press and release the "OK" button. Display should say "Hardware failure status". If not there already, Arrow Key over to "Hardware failure status",
    Press and release the "OK" button. Display should say "Hardware failure status: Clear. Press OK to clear".
  • Press and release the "OK" Button. Message changes to "Hardware failure status Cleared. Press Cancel to continue".
  • Press and release the "CANCEL" button as many times as necessary, until the "Welcome to Photosmart Express" screen appears, or, the "Ink System Failure" screen appears. Do not try to print at this stage.
  • Using the Power Button, turn the unit OFF and unplug the power cable from back of the printer and wall outlet.
  • Wait 30 seconds for the power to get discharged and then plug the power cable into the wall outlet first and then into the back of the printer.
  • Turn the unit on. The printer may display message "Use Power button to shutdown the printer" followed by "Press OK to continue". 
  • Press OK. The Printer will start the "One time ink initialization process". Allow this process to complete and do not interrupt. 
  • Once the initialization process is complete, the printer will print out a Diagnostic Page. 
Solution 2:

  • Unplug the power from behind the printer.
  • Wait for 60 seconds. 
  • Hold down the “print photo” and “cancel” at the same time. You should be able to see it with a blank screen for several seconds.
  • It's done
  • Try again and again if at first it doesnt work.

Solution 3:
  • Unplug the all-in-one from power.
  • Wait 30 seconds.
  • Plug in the power only.
  • Repeat steps 2-4 two more times.
  • On the third time after plugging the unit into power check the functionality. 

Solution 4:
  • Unplug the power cord from the back of the HP All-in-One.
  • Wait for the unit to go to the sleep mode. Wait for 60 seconds.
  • Press and hold Print Photos & Photo Fix buttons simultaneously on the control panel; keep them pressed and reconnect the power cord to the All-in-One.
  • Continue pressing the buttons until the display goes blank or Reset shows on the control panel display.

  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • RSS
Read User's Comments1
Posted by efixsolution

HP Printer Error Code 20 - How to Fix This Common Error Quickly & Easily

8:38 AM |

HP Printer error code 20, as the name describes, is a problem with the HP printer on your system. The issue is typically caused if the printer is either not configured correctly, or your system tries to send an erroneous command to it. This error will typically show when you try and print a document / spreadsheet or another piece of data from your system, and will stop the print-out from proceeding. In order to fix this, it's advisable that you follow the steps outlined in this tutorial.
The HP error 20 will generally show in this format:

"Printer not activated - Error code 20″
There are several reasons why this error may show, including having an outdated / erroneous printer driver, not installing the printer software you need on your PC correctly, or having registry errors on your system. The bottom line of the problem is basically that when you try and print out a document / file from your Printer, there are certain issues which prevent Windows from either recognizing or connecting with the printer on your system. To fix the issue, you need to repair the various problems which cause this to occur - which can be done in quite an easy way.
The first thing to do to ensure the error code 20 is does not show up again on your system is make your HP printer the "default" printer. It might be the case that your system will be unable to use the printer as it cannot identify which one to use. Making your HP printer your default printer will resolve this issue, and should help your system to correctly print out. After that, you should also look to reinstall the HP printer software on your computer. This will essentially remove the printer from your PC and then place it back there again - allowing your system to correct any potential issues it had the last time it was installed.
It's highly recommended that you also "clean out the registry" of your PC by using a registry cleaner program. These are software tools which will fix any errors that are inside the 'registry' of your system - which is a large database that Windows uses to store vital settings and information for your computer. It's often the case that many registry settings will either become damaged or corrupted - leading your PC to be unable to use the files that it needs to run. This often causes a variety of errors to show, and is one of the main reasons for the HP printer error code 20 showing. To fix this, it's advisable that you clean out the registry of your system with a registry cleaner tool.

Article Source: http://EzineArticles.com/4774431

  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • RSS
Read User's Comments0
Posted by efixsolution

How To Fix XXXX Printer Error on HP Laserjet Printer

8:18 AM | Labels: ,

Solution:
  • Press CANCEL JOB to clear the print job from the printer memory.
  • Turn the printer off and then back on.
  • Try printing a job from a different software application. If the job prints, go back to
  • the first application and try printing a different file. If the message appears only with a certain software application or print job, contact the software vendor for assistance.
  • If the message persists with different software applications and print jobs, disconnect all cables to the printer that connect it to the network or PC.
  • Turn the printer off.
  • Remove all memory DIMMs or third-party DIMMs from the printer. (Do not remove the firmware DIMM in slot J1.)
  • Remove all EIO devices from the printer.
  • Turn the printer on.
  • If the error no longer exists, install each DIMM and EIO device one at a time, making sure to turn the printer off and back on as you install each device.
  • Replace a DIMM or EIO device if you determine that it causes the error.
  • Remember to reconnect all cables that connect the printer to the network or computer.
  • If the error persists, replace the firmware DIMM.
  • Replace the formatter and calibrate the printer. See Calibrate now.
Source:-http://www.freesolutionstore.com/printer/xxxx-printer-error-on-hp-laserjet-printers.html

  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • RSS
Read User's Comments0
Posted by efixsolution

How to Fix HP Printer Errors

8:16 AM | Labels: ,

Many times, when an HP printer has an error, the cause is clearly shown on the monitor. However, in other cases, the cause of the HP printer error may be a complete mystery. Instead of going on a wild-goose chase to find the exact solution for the printer error, it's better to try a series of routine troubleshooting steps first. If these steps fail to fix the printer error, you may find the solution on the HP website.

Instructions:-

  • Ensure that the HP printer cables are properly connected. If in doubt, turn off the printer, unplug it and disconnect all of the printer cables. Plug it back in and reconnect the cables. Turn the printer back on again to see if the error has cleared.

  • Check the HP printer cartridges and print heads to ensure that they're installed properly. Also see if the printer cartridges are empty. If the ink cartridges have sufficient ink, reinstall the cartridges and the print heads. If an ink cartridges is empty, replace it with a new one.
  • Make sure that the HP printer's software is properly installed. If the device does not respond when you try to print or the printer software won't initialize, uninstall and reinstall the HP printer software.
  • See if your computer's firewall is preventing the HP printer from functioning properly. Open your firewall preferences and add the printer software executable file (*.exe) as an exception or disable the firewall temporarily to see if this fixes the error.
  • Check the print settings in the HP printer software if the pages don't print properly. Make sure that the margins are set to at least the minimum margins that your HP printer supports. Also ensure that you've selected the correct printer settings for the paper size and type of document you're trying to print. To access these printer settings more easily, open the HP Solution Center.
  • Clean and align the printer cartridges. Open the software for your HP printer or the HP Solution Center to access these maintenance features.
  • Double-click on the HP printer icon in the system tray on the bottom right of the screen, if it appears. Look under "Status" in the printing queue to read the error messages. Right-click on the entries and select "Cancel," if necessary.
  • Navigate to the HP website to search on your specific printer model if these steps fail to fix the printer error. Click on "Support and Troubleshooting." Click "Solve a Problem" to find solutions for the HP printer's specific error. Also check the "Software and Downloads" area for software and driver updates.

Source:-http://www.ehow.com/how_4999655_fix-hp-printer-errors.html

  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • RSS
Read User's Comments0
Posted by efixsolution

How to fix error C4EB8802 on HP printers

9:55 AM | Labels: , ,

This error appears on these models: Photosmart D110A, C4780, 4683, 4680, etc...

Solution 1:
  • Switch on the printer. 
  • Disconnect USB cable or lan cable and disconnect the power cable. 
  • Wait for 30 seconds. 
  • Connect the power cable. 
  • Switch on the printer. 

Solution 2:
  • If the error persist.
  • Disconnect the power cable with the printer powered on.
  • Hold on "OK" et  "HELP" buttons while plugging in the power cord.
  • Switch on the printer. 

Solution 3:
  • Uninstall printer driver and software.
  • Disconnect USB cable. 
  • Reboot and reconnect the printer. 
  • Install the drivers. 

Solution 4: 
  • In the firewall: verify that the printer is not blocked.

  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • RSS
Read User's Comments1
Posted by efixsolution
Subscribe to: Posts (Atom)